PROJECT REQUEST FORM

Engineering Request Form

We are one of the only seal manufacturing company that also specializes in engineering, so you can rely on us to produce your seals, bearings or springs—from start to finish—all under one roof.


Fill out the form below to tell us about your specific needs.

Need Our Help?

Contact Us

What Our Customers Have to Say

When it comes to engineering and manufacturing seals, customer satisfaction is everything. From initial communications to the quality of the products we deliver, we always aim to be the best. Want proof? Read what some of our customers have to say about working with us!

We’ve been using Eclipse Engineering for our sealing needs for nearly 18 years and they’ve been one of our most reliable vendors. It’s been a pleasure to work with Barry, Doug, and the other knowledgeable folks at EE. They’ve helped us solve some tricky sealing problems while providing excellent product and customer service.


Bob Mellette

V.P. - Engineering | C.A.Technologies | Louisville, CO |

Eclipse has successfully helped us in solving application challenges by providing guidance in the procurement of new seals for projects. Other benefits have been in the area of cost reductions, and in supporting our use of blanket orders. Their quick response to ours needs has made Eclipse a good company to partner with.


Elaine

TEI Rock Drills

We are always in need of creative sealing solutions. Our equipment sees some of the toughest sealing applications out there, and the seals we use must work with a wide range of materials and industrial solvents at a wide range of pressures and flow rates. Eclipse has been able to consistently provide effective solutions for our sealing challenges.


Pete

Carlisle Fluid Technologies

Everyone at Eclipse has been above board and great to work with for over 25 years plus. From design to customer service they have always responded to our needs.


Dave

B&B Machine & Grinding

For many years I have relied on the service I get from Barry Bundeson and everyone else at Eclipse. I have found them to be unfailingly courteous, professional, and knowledgeable. They’re willing to go the extra mile to provide the information that helps me address specific applications and sealing needs. I recommend them wholeheartedly.


Darek

Mountain Racing Products

Eclipse Engineering, Inc has been a reliable key partner in our production process. I can always rely on having what I need available and delivered (Thank you Barry!) when I need it. Recently I was out of the country and received a desperate message from my production supervisor that we had unexpectedly run critically low on a component. All it took was 1 email to Eclipse and Barry had what we needed delivered and saved our production deadlines.

Glen

Eclipse supplies our company with a range of products from seals to O-rings. We have worked with them over the last 8-10 years. They have a engineering capability that has helped us with some parts that needed redesign and updating. Barry has always been very responsive when we had a question or issue.

John Beard

Car-May LLC

I like to work with Eclipse because of the top notch service we receive from our Eclipse representatives. As a purchasing agent, they go above and beyond my expectations of what an industrial vendor should be. The products have a short lead time, and if an item isn’t available they push for expedited service, including hand delivering our parts if we need them same day. Barry Bundeson and Chris Snook are consistently working to ensure that we have the parts we need, and are very professional and excellent to work with. I honestly wish all of my purchasing contacts were as easy and professional as Eclipse. I hope Barry and Chris are recognized for their superior service that they provide C.A. Technologies, and our treasured customers!


Chris Castillo

Purchasing | C.A. Technologies |

I highly recommend Eclipse Engineering for all rubber product solutions. We have used Eclipse for reverse engineering our door seals and many other applications which require rubber parts. Eclipse has been very helpful with smoke and flame applications as required on many of our parts. I have always recommended Eclipse to any company or person needing to find rubber solutions to equipment needs.


Shawn Jakan

Senior Storeroom Supervisor | RTD |

We count on Eclipse Engineering to provide most of the seals used in the manufacture of our tools. They are a reliable partner helping us grow for over a decade. From assisting our R & D engineers with design features to providing on-time accurate deliveries we are confident in their capabilities.


Teri

StoneAge Tools

"We started Eclipse with the premise that if we could solve enough of our customers problems they would continue to come back to us for solutions regardless of the type of products we offered."

Engineers

What Can We Help You With?

Start a project request form and give us the specifics of your project. Our team will review and be in touch with you shortly!

CONTACT US
Share by: